APKGD/3L55-65-55 UR-1600mm3 layer Co-Extruder

This 3-layer Coextruder can work with many different materials to produce the film for INDUSTRIAL, FOOD MEDICAL, LAMINATION, CONVERTING INDUSTRIES, and THERMO-SHRINK FILM

Our Blow Film lines are at a competitive Investment level, have low power consumption, high production capacity, are Easy to operate, and have very low environmental impact.

Best Performances in processing biodegradable and compostable material.

3 LAYER CO-EXTRUDER 1600MM FILM WIDE.
Co-Extruder Model: APKGd/3L55-65-55 UR-1600mm
General Specification     
Voltage:    Ac /380V/440V /3Phrases/50Hz   Customized
Film Lay-flat Width    1000-1400mm
Film Thickness:    0.028-0.200mm
Film Structure:    A(inner Layer) /B (middle Layer) / C （Out Layer）
Raw Materials    LLDPE / LDPE
Reel Diameter    Max.Φ700mm
Max.Extrusion Output    230-260 Kg/Hr
Total Power    Approx. 176Kw  
after the heating reaches the setup Temp , the power is around 110 kW
Machine Dimensions（L×W×H）    12 ×4.5×  11.5  M
Line Weight    Approx. 10 tons
Extruder    
Screw Diameter (Mm):    Φ55Mm + Φ65Mm + Φ55Mm
L/D Ratio:     30:1
Screw Material    Bimetallic
Barrel Material    38 Crmoala
Max. Screw Rotating Speed:     100R/Min
Barrel Heating Areas:    4+5+4 Areas, 
Barrel Cooling Blower    180W×3 Set,×3   Installed Outside
Hopper Loader    50kg x each 3
Feed Device Cooling:    Water Circulating
Extruder Main Motor:     A30 Kw  B 37 Kw  C 30KW    
Delta  Inverter, WN/Siemens / Beide motor
Die:      
Die Size：    ABC  Φ300mm  
Temperature Control Zone    4Sets
Heating Capacity:     40 Kw
Air Ring：    Dual Lips, Diameter 1300Mm Labyrinth Opening Of The Ring
Height Of Air Ring:    130Mm
Air Pipe:    Φ80×6
Air Blower:     11 Kw  INVOANCE INVERTER
IBC System：    Yes
IBC air blower：    5.5 KW ×2
Take-Up Unit    
Rotary Take-Up Tower:    Horizontal Type  ±360°
Pinch Roller:    Φ165×1600Mm， Thickness=8Mm （Pneumatic Cylinder）
Take-Up Unit Electrical Controller System:     1.5Kw+Worm Gear Reducer（delta/ invoance Inverter）
Take-Up Speed:    5-60M/Min
Gable:    Harden Crmoala
Foam Stabilizing Equipment：    Height And Size Adjusted By Electronic Motor 
Guiding Stick：    Φ80×1600Mm
Winding
Automatic Winder.
The Winder Program Is Controlled By PLC， Human Machine Interface。